Brief Introduction
ZN-MULR is a new generation revolutionary membrane separation technology that utilizes high-frequency vibration membrane separation equipment to break through the bottleneck of traditional membrane filtration technology, which is prone to clogging and difficult to produce continuously, By applying high-frequency vibration to membrane components, strong shear forces are generated on the membrane surface, making it difficult for impurities in oil to precipitate onto he membrane surface.
ZN-ZLBM Thin Film Distillation Technology
ZN-ZLBM membrane distillation is a fluid equipment that uses high-speed distributors to produce thin films. Form a dynamic film of 3-5mm on the crude oil/waste oil. By utilizing fluid dynamics, coking can be largely prevented. In addition, under the membrane distillation system, the oil film can perform heat exchange more effectively, making the heat exchanged per unit area and the flow rate per unit area more uniform, reducing heat transfer resistance, and allowing the intemal liquid and heat to come into contact more fully, greatly improving production efficiency.
trusted expertise
Cares ultricies idm neque sed netus
innovating ideas
Cares ultricies idm neque sed netus
ZN-DRLZ low-temperature thermal desorption plasma oily sludge regeneration system
The low-temperature thermal desorption plasma oily sludge treatment technology converts the remaining heavy oil (gum, asphaltene) in the raw material into combustible gas under the catalytic action of plasma in the process of oil recovery, reducing production energy. The equipment adopts thin-layer drying principle, with high theral conductivity efficiency, thereby improving the crude oil recovery rate.
ZN-JZXT Waste Oil Regeneration and Refining System
Includingoil-solvent mixing separation system,solvent recovery system,base oil refining system.
Extract or separate non-ideal components such as colloids,
04 Solvent Extraction Equipment asphaltene,sulfur,nitrogen,oxygen compounds,etc from base oil to
ZN-LXLJ Continuous Cracking Waste Oil Regeneration Equipment
The continuous cracking refining equipment adopts our company’s unique continuous cracking process to process raw materials such as sludge, tires, and plastics. Impurities larger than 5cm in the raw materials need to be screened and transported to the continuous cracking refining equipment through a two-stage spiral seal. Through direct injection radiation heating cracking, the oil and gas mixture in the material is distilled out. The oil and gas mixture is cut into heavy fractions using the equipment’s built-in two-stage residual carbon cutting, and then liquefied by a condenser. The liquefied part of the oil and gas mixture is condensed into mixed oil, and the non liquefied part is combustible gas, which is sent to a heating furmnace to replace fuel heating. The continuous cracking refining equipment is easy to operate and has high processing efficiency. It is a necessary professional equipment dedicated to protecting the environment,resource regeneration,energy conservation and emission reduction.
ZN-JXLJ Intermittent Cracking Waste Oil Regeneration Equipment
Intermittent cracking waste oil regeneration equipment refers to the process in which high molecular weight compounds with unsaturated bonds in the main chain are broken under anaerobic or anaerobic conditions and appropriate temperatures. The products are mainly monomers, dimers, and fragments, which are then polymerized into various olcfins to remove volatile substances and form solid carbon. The products mainly include storable energy such as fuel oil and cracking gas, as well as carbon black and steel wire. The composition of each product varies with the pyrolysis method, pyrolysis temperature, and other factors,
about
avada factory
Sempery ultricies nibh at dolor cras urna eleifend nec. Atiam efficitur tempor.
