Enamel reaction kettle：Main reaction vessel, with chlorine gas passing

through the suspended PE aqueous phase for reaction

Chlorine vaporizer：Chlorine vaporizer

Condenser：Recycling unreacted chlorine gas and volatile substances

Neutralization sink：Neutralize residual HCl with NaOH solution

CPE dedicated continuous fully automatic centrifuge：Separate CPE slurry (moisture content ≤ 30%)

Flash dryer：Low temperature drying CPE (moisture content ≤0.5%)

Hydrochloric acid absorption tower：Absorb HCl from exhaust gas with water, and produce industrial hydrochloric acid as a byproduct

Wastewater treatment system：Dealing with wastewater generated by production systems.

1.CPE dedicated continuous fully automatic

centrifuge

(Processing capacity increased by 15%, energy

consumption reduced by 60-75%, capable of

continuous automatic operation for a single

unitCPE）

2.The tail gas condenser recovers

unreacted chlorine gas, which can be

reused in production with a recovery rate of

over 50%.

solution method：Polyolefin is dissolved in organic solvents (such as CCl ₄ ), and the solvent is recovered after

Suspension method：Polyolefin particles suspended in water, chlorinated with chlorine gas

Product characteristics：• Particle morphology • Moderate solubility

Solid State Method：Direct solid-state reaction between polyolefin powder and chlorinating agent (such as SO ₂ Cl₂ )

Product characteristics：• High melting point retention • Suitable for functional modification

The above are the CPO production processes we mainly provide. You can choose according to your own raw materials and expected product characteristics

We can also conduct in-depth design based on communication